Skip to main content
Warning: You are using the test version of PyPI. This is a pre-production deployment of Warehouse. Changes made here affect the production instance of TestPyPI (testpypi.python.org).
Help us improve Python packaging - Donate today!

Command line interface wrapper for Arduino IDE, inspired by ino

Project Description
# jno
Command line interface wrapper for Arduino IDE, inspired by ino.

# Installation
Using PyPi, the package can be obtained using:

pip install jno

If you prefer running the setup.py, then download repo, change working directory and do:

make install

# Initialize
To begin using jno, change working directory to your project. Then, perform:

jno init

This will initialize the basic directory structure and create a *jno.jno* file, which stores the local jno settings.

By default, jno does not know where your Arduino IDE is located - this is represented by EXEC_DIR in the config. There is a local and a global version of *jno.jno* files. The local *jno.jno* file overwrites the global version IF the parameters are not set to NULL or DEFAULT. To set up your EXEC_DIR, find your Arduino folder - say /home/pi/Documents/arduino-1.8.1. Perform:

jno setglobal --EXEC_DIR=/home/pi/Documents/arduino-1.8.1

OR

jno setlocal --EXEC_DIR=/home/pi/Documents/arduino-1.8.1

depending on what you plan on doing - setglobal means a local .jno with EXEC_DIR set to NULL will use the global EXEC_DIR instead.

Once EXEC_DIR is set, jno is ready to go. You should change the global and local settings to your liking - the options are documented below.

# Usage
The commands supported are:

*jno build [parameters]*: compile the code, verifying that there are no errors

*jno upload [parameters]*: compile + upload the code

*jno serial [parameters]*: start a serial monitor

*jno init*: initialize current working directory with lib/, sketch/, and *jno.jno* if they are not present

*jno listmodels*: list the board models supported by your Arduino IDE

*jno setlocal [setting]*: change setting in local *jno.jno*

*jno setglobal [setting]*: change setting in global *jno.jno*

## Settings (for setlocal and setglobal)
These settings are the same as those contained in *jno.jno* files. These settings WILL be saved locally or globally. Note that lower case inputs are equally as valid. Possible parameters are as follows:

*--EXEC_DIR=/some/dir*: directory that contains the arduino executable file. NULL is the default value.

*--EXEC_LIBS=/some/dir/libraries*: directory that Arduino IDE loads libraries from. By DEFAULT, this uses arduino's internal libraries/ directory, but this may be unsafe if your local lib/ contents have the same name as core libraries.

*--BOARD=boardname*: board that code should be compiled for. Possible 'boardname' choices include *uno* and *mega*. For boardname options, use the *listmodels* command.

*--PORT=/some/port*: port of arduino to upload code or start serial communication. On Linux, dmesg is useful in determining this.

*--BAUDRATE=9600*: baudrate used for serial communication. Must be an integer.

*--SKETCH_DIR=/some/dir*: directory of the local jno 'home'. Only mess with this if this *jno.jno* is meant to point to a deeper directory.

## Parameters (for other commands)
Parameters are used only for the current invocation of the command and override local settings - they WILL NOT be saved. Possible settings are:

*-b, --baud=9600*: see --BAUDRATE above. Only affects serial command.

*-p, --port=/some/port*: see --PORT above. Affects the upload and serial commands.

*--board=boardname*: see --BOARD above. Affects the build and upload commands.

# jno Directory Structure

A valid jno directory contains a *lib* directory, a *sketch* directory with a *sketch.ino* inside, and a *jno.jno* file. The *lib* directory should contain any libraries not included in your Arduino IDE. The structure looks like this:

```
my_ard_proj
.
|-- lib [directory containing dependencies]
|
|-- sketch
| `-- sketch.ino
|
`-- jno.jno
```
Release History

Release History

This version
History Node

0.3.0

History Node

0.2.2

History Node

0.2.1

History Node

0.1.3

History Node

0.1.2

History Node

0.1.1

Download Files

Download Files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

File Name & Checksum SHA256 Checksum Help Version File Type Upload Date
jno-0.3.0.tar.gz (8.8 kB) Copy SHA256 Checksum SHA256 Source Sep 24, 2017

Supported By

WebFaction WebFaction Technical Writing Elastic Elastic Search Pingdom Pingdom Monitoring Dyn Dyn DNS Sentry Sentry Error Logging CloudAMQP CloudAMQP RabbitMQ Heroku Heroku PaaS Kabu Creative Kabu Creative UX & Design Fastly Fastly CDN DigiCert DigiCert EV Certificate Rackspace Rackspace Cloud Servers DreamHost DreamHost Log Hosting